Currently set to Index
Currently set to No Follow

Different Kinds of Air Ducts Used in the HVAC Industry

In every HVAC system, one of the most important elements to check is the Duct system or what is known as ductwork.


188
Share via
7 shares, 188 points
Share via

In every HVAC system, one of the most important elements to check is the Duct (air ducts) system or what is known as ductwork. Ducts are passages that are used in heating, ventilation, and air conditioning to provide and remove air. They are used in different HVAC elements like air supply, air processing units, air return, diffusers, and more. To be able to achieve a high efficiency HVAC system, the type of ductwork should be adequate enough and sized correctly for the system.

The types of ducts that are installed depends on the quality of the installation since their benefits vary from energy savings to the acoustic properties of the system. Four common types of ducts are flexible ducts, metal ducts, glass wool duct boards and plastic ducts.

Flexible ducts

 

 

Flexible ducts are made up of two aluminum and polyester concentric tubes, wherein a glass wool layer or fiberglass wool is inserted in between the two tubes to serve as thermal insulation. Their main use is to connect main air ducts and terminal units such as diffusers or grids. It makes use of triple lamination of aluminum foil, polyester as well as metalized polyester film permanently bonded to a coated spring steel wire helix. The external part of the duct is wrapped with a blanket of fiberglass insulation.

Metal ducts

Source: iStock (Different kinds of Air Ducts)

Metal ducts are made from different kinds of sheet metal, like galvanized or stainless steel, copper and aluminum. They are cut, and shaped into the required measured shape for the duct system. Being a good thermal conductor, metal ducts require thermal insulation as well. The most common material used is fiberglass wool that is wrapped around the outer duct wall. Insulation can be installed on the inner wall of the duct as well using fiberglass wool duct wraps or duct slabs that are faced with glass matting or mesh. These provide acoustic insulation and strengthening the inner part of the duct.

Read more  What are the Different Kinds of Air Ducts in HVAC?

Fiberglass Duct boards

Source: ACHR News (Different kinds of Air Ducts)

Fiberglass Duct boards are made from high density fiberglass boards. The ducts will be shaped from the boards by cutting and folding respectively to get the needed shape for the system. The side of the board that has contact with the air stream after the duct assembly is called the internal face, while the other face is called the external face.

The external face of the duct will be installed with a strong reinforced aluminum foil that will act as a vapour barrier. On the other hand, the internal face will have either an aluminum coating or fabric layer depending on the requirements needed.

Plastic Ducts

Plastic ducts which include ducts that are made from plastic or foam boards, are made by cutting and folding the needed shapes to create the cross-sectional shape of the duct system.

The internal and external board faces are usually installed with aluminum coating.

 

Share via


Like it? Share with your friends!

188
Share via
7 shares, 188 points
Engr. Alaric Saltzman
Rugby is life. Studied electrical engineering at Imperial College London. Lives in Peoria, Illinois. Follow me facebook.com/alaric.saltzman.18294

One Comment

Your email address will not be published. Required fields are marked *

I accept the Privacy Policy * for Click to select the duration you give consent until.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Send this to a friend